terraform/command/state_meta.go

224 lines
6.7 KiB
Go
Raw Normal View History

2016-03-25 18:17:25 +01:00
package command
import (
2016-05-11 18:16:48 +02:00
"fmt"
"sort"
2016-05-11 18:16:48 +02:00
"time"
2016-03-25 18:17:25 +01:00
"github.com/hashicorp/terraform/addrs"
"github.com/hashicorp/terraform/internal/tfdiags"
"github.com/hashicorp/terraform/states"
"github.com/hashicorp/terraform/states/statemgr"
backendLocal "github.com/hashicorp/terraform/internal/backend/local"
2016-03-25 18:17:25 +01:00
)
// StateMeta is the meta struct that should be embedded in state subcommands.
type StateMeta struct {
Meta
}
2016-03-25 18:17:25 +01:00
// State returns the state for this meta. This gets the appropriate state from
// the backend, but changes the way that backups are done. This configures
// backups to be timestamped rather than just the original state path plus a
// backup path.
func (c *StateMeta) State() (statemgr.Full, error) {
var realState statemgr.Full
backupPath := c.backupPath
stateOutPath := c.statePath
2016-05-11 18:16:48 +02:00
// use the specified state
if c.statePath != "" {
realState = statemgr.NewFilesystem(c.statePath)
} else {
// Load the backend
b, backendDiags := c.Backend(nil)
if backendDiags.HasErrors() {
return nil, backendDiags.Err()
}
2017-01-19 05:50:45 +01:00
workspace, err := c.Workspace()
if err != nil {
return nil, err
}
backend: Validate remote backend Terraform version When using the enhanced remote backend, a subset of all Terraform operations are supported. Of these, only plan and apply can be executed on the remote infrastructure (e.g. Terraform Cloud). Other operations run locally and use the remote backend for state storage. This causes problems when the local version of Terraform does not match the configured version from the remote workspace. If the two versions are incompatible, an `import` or `state mv` operation can cause the remote workspace to be unusable until a manual fix is applied. To prevent this from happening accidentally, this commit introduces a check that the local Terraform version and the configured remote workspace Terraform version are compatible. This check is skipped for commands which do not write state, and can also be disabled by the use of a new command-line flag, `-ignore-remote-version`. Terraform version compatibility is defined as: - For all releases before 0.14.0, local must exactly equal remote, as two different versions cannot share state; - 0.14.0 to 1.0.x are compatible, as we will not change the state version number until at least Terraform 1.1.0; - Versions after 1.1.0 must have the same major and minor versions, as we will not change the state version number in a patch release. If the two versions are incompatible, a diagnostic is displayed, advising that the error can be suppressed with `-ignore-remote-version`. When this flag is used, the diagnostic is still displayed, but as a warning instead of an error. Commands which will not write state can assert this fact by calling the helper `meta.ignoreRemoteBackendVersionConflict`, which will disable the checks. Those which can write state should instead call the helper `meta.remoteBackendVersionCheck`, which will return diagnostics for display. In addition to these explicit paths for managing the version check, we have an implicit check in the remote backend's state manager initialization method. Both of the above helpers will disable this check. This fallback is in place to ensure that future code paths which access state cannot accidentally skip the remote version check.
2020-11-13 22:43:56 +01:00
// Check remote Terraform version is compatible
remoteVersionDiags := c.remoteBackendVersionCheck(b, workspace)
c.showDiagnostics(remoteVersionDiags)
if remoteVersionDiags.HasErrors() {
return nil, fmt.Errorf("Error checking remote Terraform version")
}
// Get the state
s, err := b.StateMgr(workspace)
if err != nil {
return nil, err
}
// Get a local backend
localRaw, backendDiags := c.Backend(&BackendOpts{ForceLocal: true})
if backendDiags.HasErrors() {
// This should never fail
panic(backendDiags.Err())
}
localB := localRaw.(*backendLocal.Local)
_, stateOutPath, _ = localB.StatePaths(workspace)
if err != nil {
return nil, err
}
realState = s
}
2017-01-19 05:50:45 +01:00
// We always backup state commands, so set the back if none was specified
// (the default is "-", but some tests bypass the flag parsing).
if backupPath == "-" || backupPath == "" {
// Determine the backup path. stateOutPath is set to the resulting
// file where state is written (cached in the case of remote state)
backupPath = fmt.Sprintf(
"%s.%d%s",
stateOutPath,
time.Now().UTC().Unix(),
DefaultBackupExtension)
}
2016-05-11 18:16:48 +02:00
// If the backend is local (which it should always be, given our asserting
// of it above) we can now enable backups for it.
if lb, ok := realState.(*statemgr.Filesystem); ok {
lb.SetBackupPath(backupPath)
2016-05-11 18:16:48 +02:00
}
return realState, nil
}
command: Fix various issues in the "terraform state ..." subcommands In earlier refactoring we updated these commands to support the new address and state types, but attempted to partially retain the old-style "StateFilter" abstraction that originally lived in the Terraform package, even though that was no longer being used for any other functionality. Unfortunately the adaptation of the existing filtering to the new types wasn't exact and so these commands ended up having a few bugs that were not covered by the existing tests. Since the old StateFilter behavior was the source of various misbehavior anyway, here it's removed altogether and replaced with some simpler functions in the state_meta.go file that are tailored to the use-cases of these sub-commands. As well as just generally behaving more consistently with the other parts of Terraform that use the new resource address types, this commit fixes the following bugs: - A resource address of aws_instance.foo would previously match an resource of that type and name in any module, which disagreed with the expected interpretation elsewhere of meaning a single resource in the root module. - The "terraform state mv" command was not supporting moves from a single resource address to an indexed address and vice-versa, because the old logic didn't need to make that distinction while they are two separate address types in the new logic. Now we allow resources that do not have count/for_each to be treated as if they are instances for the purposes of this command, which is a better match for likely user intent and for the old behavior. Finally, we also clean up a little some of the usage output from these commands, which hasn't been updated for some time and so had both some stale information and some inaccurate terminology.
2019-03-16 03:51:26 +01:00
func (c *StateMeta) lookupResourceInstanceAddr(state *states.State, allowMissing bool, addrStr string) ([]addrs.AbsResourceInstance, tfdiags.Diagnostics) {
target, diags := addrs.ParseTargetStr(addrStr)
if diags.HasErrors() {
return nil, diags
}
2016-03-25 18:17:25 +01:00
command: Fix various issues in the "terraform state ..." subcommands In earlier refactoring we updated these commands to support the new address and state types, but attempted to partially retain the old-style "StateFilter" abstraction that originally lived in the Terraform package, even though that was no longer being used for any other functionality. Unfortunately the adaptation of the existing filtering to the new types wasn't exact and so these commands ended up having a few bugs that were not covered by the existing tests. Since the old StateFilter behavior was the source of various misbehavior anyway, here it's removed altogether and replaced with some simpler functions in the state_meta.go file that are tailored to the use-cases of these sub-commands. As well as just generally behaving more consistently with the other parts of Terraform that use the new resource address types, this commit fixes the following bugs: - A resource address of aws_instance.foo would previously match an resource of that type and name in any module, which disagreed with the expected interpretation elsewhere of meaning a single resource in the root module. - The "terraform state mv" command was not supporting moves from a single resource address to an indexed address and vice-versa, because the old logic didn't need to make that distinction while they are two separate address types in the new logic. Now we allow resources that do not have count/for_each to be treated as if they are instances for the purposes of this command, which is a better match for likely user intent and for the old behavior. Finally, we also clean up a little some of the usage output from these commands, which hasn't been updated for some time and so had both some stale information and some inaccurate terminology.
2019-03-16 03:51:26 +01:00
targetAddr := target.Subject
var ret []addrs.AbsResourceInstance
switch addr := targetAddr.(type) {
case addrs.ModuleInstance:
// Matches all instances within the indicated module and all of its
// descendent modules.
// found is used to identify cases where the selected module has no
// resources, but one or more of its submodules does.
found := false
command: Fix various issues in the "terraform state ..." subcommands In earlier refactoring we updated these commands to support the new address and state types, but attempted to partially retain the old-style "StateFilter" abstraction that originally lived in the Terraform package, even though that was no longer being used for any other functionality. Unfortunately the adaptation of the existing filtering to the new types wasn't exact and so these commands ended up having a few bugs that were not covered by the existing tests. Since the old StateFilter behavior was the source of various misbehavior anyway, here it's removed altogether and replaced with some simpler functions in the state_meta.go file that are tailored to the use-cases of these sub-commands. As well as just generally behaving more consistently with the other parts of Terraform that use the new resource address types, this commit fixes the following bugs: - A resource address of aws_instance.foo would previously match an resource of that type and name in any module, which disagreed with the expected interpretation elsewhere of meaning a single resource in the root module. - The "terraform state mv" command was not supporting moves from a single resource address to an indexed address and vice-versa, because the old logic didn't need to make that distinction while they are two separate address types in the new logic. Now we allow resources that do not have count/for_each to be treated as if they are instances for the purposes of this command, which is a better match for likely user intent and for the old behavior. Finally, we also clean up a little some of the usage output from these commands, which hasn't been updated for some time and so had both some stale information and some inaccurate terminology.
2019-03-16 03:51:26 +01:00
ms := state.Module(addr)
if ms != nil {
found = true
ret = append(ret, c.collectModuleResourceInstances(ms)...)
2016-03-25 18:17:25 +01:00
}
command: Fix various issues in the "terraform state ..." subcommands In earlier refactoring we updated these commands to support the new address and state types, but attempted to partially retain the old-style "StateFilter" abstraction that originally lived in the Terraform package, even though that was no longer being used for any other functionality. Unfortunately the adaptation of the existing filtering to the new types wasn't exact and so these commands ended up having a few bugs that were not covered by the existing tests. Since the old StateFilter behavior was the source of various misbehavior anyway, here it's removed altogether and replaced with some simpler functions in the state_meta.go file that are tailored to the use-cases of these sub-commands. As well as just generally behaving more consistently with the other parts of Terraform that use the new resource address types, this commit fixes the following bugs: - A resource address of aws_instance.foo would previously match an resource of that type and name in any module, which disagreed with the expected interpretation elsewhere of meaning a single resource in the root module. - The "terraform state mv" command was not supporting moves from a single resource address to an indexed address and vice-versa, because the old logic didn't need to make that distinction while they are two separate address types in the new logic. Now we allow resources that do not have count/for_each to be treated as if they are instances for the purposes of this command, which is a better match for likely user intent and for the old behavior. Finally, we also clean up a little some of the usage output from these commands, which hasn't been updated for some time and so had both some stale information and some inaccurate terminology.
2019-03-16 03:51:26 +01:00
for _, cms := range state.Modules {
if !addr.Equal(cms.Addr) {
if addr.IsAncestor(cms.Addr) || addr.TargetContains(cms.Addr) {
found = true
ret = append(ret, c.collectModuleResourceInstances(cms)...)
}
command: Fix various issues in the "terraform state ..." subcommands In earlier refactoring we updated these commands to support the new address and state types, but attempted to partially retain the old-style "StateFilter" abstraction that originally lived in the Terraform package, even though that was no longer being used for any other functionality. Unfortunately the adaptation of the existing filtering to the new types wasn't exact and so these commands ended up having a few bugs that were not covered by the existing tests. Since the old StateFilter behavior was the source of various misbehavior anyway, here it's removed altogether and replaced with some simpler functions in the state_meta.go file that are tailored to the use-cases of these sub-commands. As well as just generally behaving more consistently with the other parts of Terraform that use the new resource address types, this commit fixes the following bugs: - A resource address of aws_instance.foo would previously match an resource of that type and name in any module, which disagreed with the expected interpretation elsewhere of meaning a single resource in the root module. - The "terraform state mv" command was not supporting moves from a single resource address to an indexed address and vice-versa, because the old logic didn't need to make that distinction while they are two separate address types in the new logic. Now we allow resources that do not have count/for_each to be treated as if they are instances for the purposes of this command, which is a better match for likely user intent and for the old behavior. Finally, we also clean up a little some of the usage output from these commands, which hasn't been updated for some time and so had both some stale information and some inaccurate terminology.
2019-03-16 03:51:26 +01:00
}
}
if found == false && !allowMissing {
diags = diags.Append(tfdiags.Sourceless(
tfdiags.Error,
"Unknown module",
fmt.Sprintf(`The current state contains no module at %s. If you've just added this module to the configuration, you must run "terraform apply" first to create the module's entry in the state.`, addr),
))
}
command: Fix various issues in the "terraform state ..." subcommands In earlier refactoring we updated these commands to support the new address and state types, but attempted to partially retain the old-style "StateFilter" abstraction that originally lived in the Terraform package, even though that was no longer being used for any other functionality. Unfortunately the adaptation of the existing filtering to the new types wasn't exact and so these commands ended up having a few bugs that were not covered by the existing tests. Since the old StateFilter behavior was the source of various misbehavior anyway, here it's removed altogether and replaced with some simpler functions in the state_meta.go file that are tailored to the use-cases of these sub-commands. As well as just generally behaving more consistently with the other parts of Terraform that use the new resource address types, this commit fixes the following bugs: - A resource address of aws_instance.foo would previously match an resource of that type and name in any module, which disagreed with the expected interpretation elsewhere of meaning a single resource in the root module. - The "terraform state mv" command was not supporting moves from a single resource address to an indexed address and vice-versa, because the old logic didn't need to make that distinction while they are two separate address types in the new logic. Now we allow resources that do not have count/for_each to be treated as if they are instances for the purposes of this command, which is a better match for likely user intent and for the old behavior. Finally, we also clean up a little some of the usage output from these commands, which hasn't been updated for some time and so had both some stale information and some inaccurate terminology.
2019-03-16 03:51:26 +01:00
case addrs.AbsResource:
// Matches all instances of the specific selected resource.
rs := state.Resource(addr)
if rs == nil {
if !allowMissing {
diags = diags.Append(tfdiags.Sourceless(
tfdiags.Error,
"Unknown resource",
fmt.Sprintf(`The current state contains no resource %s. If you've just added this resource to the configuration, you must run "terraform apply" first to create the resource's entry in the state.`, addr),
))
}
command: Fix various issues in the "terraform state ..." subcommands In earlier refactoring we updated these commands to support the new address and state types, but attempted to partially retain the old-style "StateFilter" abstraction that originally lived in the Terraform package, even though that was no longer being used for any other functionality. Unfortunately the adaptation of the existing filtering to the new types wasn't exact and so these commands ended up having a few bugs that were not covered by the existing tests. Since the old StateFilter behavior was the source of various misbehavior anyway, here it's removed altogether and replaced with some simpler functions in the state_meta.go file that are tailored to the use-cases of these sub-commands. As well as just generally behaving more consistently with the other parts of Terraform that use the new resource address types, this commit fixes the following bugs: - A resource address of aws_instance.foo would previously match an resource of that type and name in any module, which disagreed with the expected interpretation elsewhere of meaning a single resource in the root module. - The "terraform state mv" command was not supporting moves from a single resource address to an indexed address and vice-versa, because the old logic didn't need to make that distinction while they are two separate address types in the new logic. Now we allow resources that do not have count/for_each to be treated as if they are instances for the purposes of this command, which is a better match for likely user intent and for the old behavior. Finally, we also clean up a little some of the usage output from these commands, which hasn't been updated for some time and so had both some stale information and some inaccurate terminology.
2019-03-16 03:51:26 +01:00
break
}
command: Fix various issues in the "terraform state ..." subcommands In earlier refactoring we updated these commands to support the new address and state types, but attempted to partially retain the old-style "StateFilter" abstraction that originally lived in the Terraform package, even though that was no longer being used for any other functionality. Unfortunately the adaptation of the existing filtering to the new types wasn't exact and so these commands ended up having a few bugs that were not covered by the existing tests. Since the old StateFilter behavior was the source of various misbehavior anyway, here it's removed altogether and replaced with some simpler functions in the state_meta.go file that are tailored to the use-cases of these sub-commands. As well as just generally behaving more consistently with the other parts of Terraform that use the new resource address types, this commit fixes the following bugs: - A resource address of aws_instance.foo would previously match an resource of that type and name in any module, which disagreed with the expected interpretation elsewhere of meaning a single resource in the root module. - The "terraform state mv" command was not supporting moves from a single resource address to an indexed address and vice-versa, because the old logic didn't need to make that distinction while they are two separate address types in the new logic. Now we allow resources that do not have count/for_each to be treated as if they are instances for the purposes of this command, which is a better match for likely user intent and for the old behavior. Finally, we also clean up a little some of the usage output from these commands, which hasn't been updated for some time and so had both some stale information and some inaccurate terminology.
2019-03-16 03:51:26 +01:00
ret = append(ret, c.collectResourceInstances(addr.Module, rs)...)
case addrs.AbsResourceInstance:
is := state.ResourceInstance(addr)
if is == nil {
if !allowMissing {
diags = diags.Append(tfdiags.Sourceless(
tfdiags.Error,
"Unknown resource instance",
fmt.Sprintf(`The current state contains no resource instance %s. If you've just added its resource to the configuration or have changed the count or for_each arguments, you must run "terraform apply" first to update the resource's entry in the state.`, addr),
))
}
break
}
ret = append(ret, addr)
2016-03-25 18:17:25 +01:00
}
command: Fix various issues in the "terraform state ..." subcommands In earlier refactoring we updated these commands to support the new address and state types, but attempted to partially retain the old-style "StateFilter" abstraction that originally lived in the Terraform package, even though that was no longer being used for any other functionality. Unfortunately the adaptation of the existing filtering to the new types wasn't exact and so these commands ended up having a few bugs that were not covered by the existing tests. Since the old StateFilter behavior was the source of various misbehavior anyway, here it's removed altogether and replaced with some simpler functions in the state_meta.go file that are tailored to the use-cases of these sub-commands. As well as just generally behaving more consistently with the other parts of Terraform that use the new resource address types, this commit fixes the following bugs: - A resource address of aws_instance.foo would previously match an resource of that type and name in any module, which disagreed with the expected interpretation elsewhere of meaning a single resource in the root module. - The "terraform state mv" command was not supporting moves from a single resource address to an indexed address and vice-versa, because the old logic didn't need to make that distinction while they are two separate address types in the new logic. Now we allow resources that do not have count/for_each to be treated as if they are instances for the purposes of this command, which is a better match for likely user intent and for the old behavior. Finally, we also clean up a little some of the usage output from these commands, which hasn't been updated for some time and so had both some stale information and some inaccurate terminology.
2019-03-16 03:51:26 +01:00
sort.Slice(ret, func(i, j int) bool {
return ret[i].Less(ret[j])
})
2016-03-25 18:17:25 +01:00
command: Fix various issues in the "terraform state ..." subcommands In earlier refactoring we updated these commands to support the new address and state types, but attempted to partially retain the old-style "StateFilter" abstraction that originally lived in the Terraform package, even though that was no longer being used for any other functionality. Unfortunately the adaptation of the existing filtering to the new types wasn't exact and so these commands ended up having a few bugs that were not covered by the existing tests. Since the old StateFilter behavior was the source of various misbehavior anyway, here it's removed altogether and replaced with some simpler functions in the state_meta.go file that are tailored to the use-cases of these sub-commands. As well as just generally behaving more consistently with the other parts of Terraform that use the new resource address types, this commit fixes the following bugs: - A resource address of aws_instance.foo would previously match an resource of that type and name in any module, which disagreed with the expected interpretation elsewhere of meaning a single resource in the root module. - The "terraform state mv" command was not supporting moves from a single resource address to an indexed address and vice-versa, because the old logic didn't need to make that distinction while they are two separate address types in the new logic. Now we allow resources that do not have count/for_each to be treated as if they are instances for the purposes of this command, which is a better match for likely user intent and for the old behavior. Finally, we also clean up a little some of the usage output from these commands, which hasn't been updated for some time and so had both some stale information and some inaccurate terminology.
2019-03-16 03:51:26 +01:00
return ret, diags
}
command: Fix various issues in the "terraform state ..." subcommands In earlier refactoring we updated these commands to support the new address and state types, but attempted to partially retain the old-style "StateFilter" abstraction that originally lived in the Terraform package, even though that was no longer being used for any other functionality. Unfortunately the adaptation of the existing filtering to the new types wasn't exact and so these commands ended up having a few bugs that were not covered by the existing tests. Since the old StateFilter behavior was the source of various misbehavior anyway, here it's removed altogether and replaced with some simpler functions in the state_meta.go file that are tailored to the use-cases of these sub-commands. As well as just generally behaving more consistently with the other parts of Terraform that use the new resource address types, this commit fixes the following bugs: - A resource address of aws_instance.foo would previously match an resource of that type and name in any module, which disagreed with the expected interpretation elsewhere of meaning a single resource in the root module. - The "terraform state mv" command was not supporting moves from a single resource address to an indexed address and vice-versa, because the old logic didn't need to make that distinction while they are two separate address types in the new logic. Now we allow resources that do not have count/for_each to be treated as if they are instances for the purposes of this command, which is a better match for likely user intent and for the old behavior. Finally, we also clean up a little some of the usage output from these commands, which hasn't been updated for some time and so had both some stale information and some inaccurate terminology.
2019-03-16 03:51:26 +01:00
func (c *StateMeta) lookupSingleStateObjectAddr(state *states.State, addrStr string) (addrs.Targetable, tfdiags.Diagnostics) {
target, diags := addrs.ParseTargetStr(addrStr)
if diags.HasErrors() {
return nil, diags
}
return target.Subject, diags
}
func (c *StateMeta) lookupResourceInstanceAddrs(state *states.State, addrStrs ...string) ([]addrs.AbsResourceInstance, tfdiags.Diagnostics) {
var ret []addrs.AbsResourceInstance
var diags tfdiags.Diagnostics
for _, addrStr := range addrStrs {
moreAddrs, moreDiags := c.lookupResourceInstanceAddr(state, false, addrStr)
ret = append(ret, moreAddrs...)
diags = diags.Append(moreDiags)
}
return ret, diags
}
command: Fix various issues in the "terraform state ..." subcommands In earlier refactoring we updated these commands to support the new address and state types, but attempted to partially retain the old-style "StateFilter" abstraction that originally lived in the Terraform package, even though that was no longer being used for any other functionality. Unfortunately the adaptation of the existing filtering to the new types wasn't exact and so these commands ended up having a few bugs that were not covered by the existing tests. Since the old StateFilter behavior was the source of various misbehavior anyway, here it's removed altogether and replaced with some simpler functions in the state_meta.go file that are tailored to the use-cases of these sub-commands. As well as just generally behaving more consistently with the other parts of Terraform that use the new resource address types, this commit fixes the following bugs: - A resource address of aws_instance.foo would previously match an resource of that type and name in any module, which disagreed with the expected interpretation elsewhere of meaning a single resource in the root module. - The "terraform state mv" command was not supporting moves from a single resource address to an indexed address and vice-versa, because the old logic didn't need to make that distinction while they are two separate address types in the new logic. Now we allow resources that do not have count/for_each to be treated as if they are instances for the purposes of this command, which is a better match for likely user intent and for the old behavior. Finally, we also clean up a little some of the usage output from these commands, which hasn't been updated for some time and so had both some stale information and some inaccurate terminology.
2019-03-16 03:51:26 +01:00
func (c *StateMeta) lookupAllResourceInstanceAddrs(state *states.State) ([]addrs.AbsResourceInstance, tfdiags.Diagnostics) {
var ret []addrs.AbsResourceInstance
var diags tfdiags.Diagnostics
for _, ms := range state.Modules {
ret = append(ret, c.collectModuleResourceInstances(ms)...)
}
sort.Slice(ret, func(i, j int) bool {
return ret[i].Less(ret[j])
})
command: Fix various issues in the "terraform state ..." subcommands In earlier refactoring we updated these commands to support the new address and state types, but attempted to partially retain the old-style "StateFilter" abstraction that originally lived in the Terraform package, even though that was no longer being used for any other functionality. Unfortunately the adaptation of the existing filtering to the new types wasn't exact and so these commands ended up having a few bugs that were not covered by the existing tests. Since the old StateFilter behavior was the source of various misbehavior anyway, here it's removed altogether and replaced with some simpler functions in the state_meta.go file that are tailored to the use-cases of these sub-commands. As well as just generally behaving more consistently with the other parts of Terraform that use the new resource address types, this commit fixes the following bugs: - A resource address of aws_instance.foo would previously match an resource of that type and name in any module, which disagreed with the expected interpretation elsewhere of meaning a single resource in the root module. - The "terraform state mv" command was not supporting moves from a single resource address to an indexed address and vice-versa, because the old logic didn't need to make that distinction while they are two separate address types in the new logic. Now we allow resources that do not have count/for_each to be treated as if they are instances for the purposes of this command, which is a better match for likely user intent and for the old behavior. Finally, we also clean up a little some of the usage output from these commands, which hasn't been updated for some time and so had both some stale information and some inaccurate terminology.
2019-03-16 03:51:26 +01:00
return ret, diags
}
func (c *StateMeta) collectModuleResourceInstances(ms *states.Module) []addrs.AbsResourceInstance {
var ret []addrs.AbsResourceInstance
for _, rs := range ms.Resources {
ret = append(ret, c.collectResourceInstances(ms.Addr, rs)...)
}
return ret
}
command: Fix various issues in the "terraform state ..." subcommands In earlier refactoring we updated these commands to support the new address and state types, but attempted to partially retain the old-style "StateFilter" abstraction that originally lived in the Terraform package, even though that was no longer being used for any other functionality. Unfortunately the adaptation of the existing filtering to the new types wasn't exact and so these commands ended up having a few bugs that were not covered by the existing tests. Since the old StateFilter behavior was the source of various misbehavior anyway, here it's removed altogether and replaced with some simpler functions in the state_meta.go file that are tailored to the use-cases of these sub-commands. As well as just generally behaving more consistently with the other parts of Terraform that use the new resource address types, this commit fixes the following bugs: - A resource address of aws_instance.foo would previously match an resource of that type and name in any module, which disagreed with the expected interpretation elsewhere of meaning a single resource in the root module. - The "terraform state mv" command was not supporting moves from a single resource address to an indexed address and vice-versa, because the old logic didn't need to make that distinction while they are two separate address types in the new logic. Now we allow resources that do not have count/for_each to be treated as if they are instances for the purposes of this command, which is a better match for likely user intent and for the old behavior. Finally, we also clean up a little some of the usage output from these commands, which hasn't been updated for some time and so had both some stale information and some inaccurate terminology.
2019-03-16 03:51:26 +01:00
func (c *StateMeta) collectResourceInstances(moduleAddr addrs.ModuleInstance, rs *states.Resource) []addrs.AbsResourceInstance {
var ret []addrs.AbsResourceInstance
for key := range rs.Instances {
ret = append(ret, rs.Addr.Instance(key))
command: Fix various issues in the "terraform state ..." subcommands In earlier refactoring we updated these commands to support the new address and state types, but attempted to partially retain the old-style "StateFilter" abstraction that originally lived in the Terraform package, even though that was no longer being used for any other functionality. Unfortunately the adaptation of the existing filtering to the new types wasn't exact and so these commands ended up having a few bugs that were not covered by the existing tests. Since the old StateFilter behavior was the source of various misbehavior anyway, here it's removed altogether and replaced with some simpler functions in the state_meta.go file that are tailored to the use-cases of these sub-commands. As well as just generally behaving more consistently with the other parts of Terraform that use the new resource address types, this commit fixes the following bugs: - A resource address of aws_instance.foo would previously match an resource of that type and name in any module, which disagreed with the expected interpretation elsewhere of meaning a single resource in the root module. - The "terraform state mv" command was not supporting moves from a single resource address to an indexed address and vice-versa, because the old logic didn't need to make that distinction while they are two separate address types in the new logic. Now we allow resources that do not have count/for_each to be treated as if they are instances for the purposes of this command, which is a better match for likely user intent and for the old behavior. Finally, we also clean up a little some of the usage output from these commands, which hasn't been updated for some time and so had both some stale information and some inaccurate terminology.
2019-03-16 03:51:26 +01:00
}
return ret
2016-03-25 18:17:25 +01:00
}
func (c *StateMeta) lookupAllResources(state *states.State) ([]*states.Resource, tfdiags.Diagnostics) {
var ret []*states.Resource
var diags tfdiags.Diagnostics
for _, ms := range state.Modules {
for _, resource := range ms.Resources {
ret = append(ret, resource)
}
}
return ret, diags
}