172 lines
7.3 KiB
YAML
172 lines
7.3 KiB
YAML
# This is the nebula example configuration file. You must edit, at a minimum, the static_host_map, lighthouse, and firewall sections
|
|
# Some options in this file are HUPable, including the pki section. (A HUP will reload credentials from disk without affecting existing tunnels)
|
|
|
|
# PKI defines the location of credentials for this node. Each of these can also be inlined by using the yaml ": |" syntax.
|
|
pki:
|
|
# The CAs that are accepted by this node. Must contain one or more certificates created by 'nebula-cert ca'
|
|
ca: /etc/nebula/ca.crt
|
|
cert: /etc/nebula/host.crt
|
|
key: /etc/nebula/host.key
|
|
#blacklist is a list of certificate fingerprints that we will refuse to talk to
|
|
#blacklist:
|
|
# - c99d4e650533b92061b09918e838a5a0a6aaee21eed1d12fd937682865936c72
|
|
|
|
# The static host map defines a set of hosts with fixed IP addresses on the internet (or any network).
|
|
# A host can have multiple fixed IP addresses defined here, and nebula will try each when establishing a tunnel.
|
|
# The syntax is:
|
|
# "{nebula ip}": ["{routable ip/dns name}:{routable port}"]
|
|
# Example, if your lighthouse has the nebula IP of 192.168.100.1 and has the real ip address of 100.64.22.11 and runs on port 4242:
|
|
static_host_map:
|
|
"192.168.100.1": ["100.64.22.11:4242"]
|
|
|
|
|
|
lighthouse:
|
|
# am_lighthouse is used to enable lighthouse functionality for a node. This should ONLY be true on nodes
|
|
# you have configured to be lighthouses in your network
|
|
am_lighthouse: false
|
|
# serve_dns optionally starts a dns listener that responds to various queries and can even be
|
|
# delegated to for resolution
|
|
#serve_dns: false
|
|
#dns:
|
|
# The DNS host defines the IP to bind the dns listener to. This also allows binding to the nebula node IP.
|
|
#host: 0.0.0.0
|
|
#port: 53
|
|
# interval is the number of seconds between updates from this node to a lighthouse.
|
|
# during updates, a node sends information about its current IP addresses to each node.
|
|
interval: 60
|
|
# hosts is a list of lighthouse hosts this node should report to and query from
|
|
# IMPORTANT: THIS SHOULD BE EMPTY ON LIGHTHOUSE NODES
|
|
hosts:
|
|
- "192.168.100.1"
|
|
|
|
# Port Nebula will be listening on. The default here is 4242. For a lighthouse node, the port should be defined,
|
|
# however using port 0 will dynamically assign a port and is recommended for roaming nodes.
|
|
listen:
|
|
host: 0.0.0.0
|
|
port: 4242
|
|
# Sets the max number of packets to pull from the kernel for each syscall (under systems that support recvmmsg)
|
|
# default is 64, does not support reload
|
|
#batch: 64
|
|
# Configure socket buffers for the udp side (outside), leave unset to use the system defaults. Values will be doubled by the kernel
|
|
# Default is net.core.rmem_default and net.core.wmem_default (/proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_default)
|
|
# Maximum is limited by memory in the system, SO_RCVBUFFORCE and SO_SNDBUFFORCE is used to avoid having to raise the system wide
|
|
# max, net.core.rmem_max and net.core.wmem_max
|
|
#read_buffer: 10485760
|
|
#write_buffer: 10485760
|
|
|
|
# Punchy continues to punch inbound/outbound at a regular interval to avoid expiration of firewall nat mappings
|
|
punchy: true
|
|
# punch_back means that a node you are trying to reach will connect back out to you if your hole punching fails
|
|
# this is extremely useful if one node is behind a difficult nat, such as symmetric
|
|
#punch_back: true
|
|
|
|
# Cipher allows you to choose between the available ciphers for your network.
|
|
# IMPORTANT: this value must be identical on ALL NODES/LIGHTHOUSES. We do not/will not support use of different ciphers simultaneously!
|
|
#cipher: chachapoly
|
|
|
|
# Local range is used to define a hint about the local network range, which speeds up discovering the fastest
|
|
# path to a network adjacent nebula node.
|
|
#local_range: "172.16.0.0/24"
|
|
|
|
# sshd can expose informational and administrative functions via ssh this is a
|
|
#sshd:
|
|
# Toggles the feature
|
|
#enabled: true
|
|
# Host and port to listen on, port 22 is not allowed for your safety
|
|
#listen: 127.0.0.1:2222
|
|
# A file containing the ssh host private key to use
|
|
# A decent way to generate one: ssh-keygen -t ed25519 -f ssh_host_ed25519_key -N "" < /dev/null
|
|
#host_key: ./ssh_host_ed25519_key
|
|
# A file containing a list of authorized public keys
|
|
#authorized_users:
|
|
#- user: steeeeve
|
|
# keys can be an array of strings or single string
|
|
#keys:
|
|
#- "ssh public key string"
|
|
|
|
# Configure the private interface. Note: addr is baked into the nebula certificate
|
|
tun:
|
|
# Name of the device
|
|
dev: nebula1
|
|
# Toggles forwarding of local broadcast packets, the address of which depends on the ip/mask encoded in pki.cert
|
|
drop_local_broadcast: false
|
|
# Toggles forwarding of multicast packets
|
|
drop_multicast: false
|
|
# Sets the transmit queue length, if you notice lots of transmit drops on the tun it may help to raise this number. Default is 500
|
|
tx_queue: 500
|
|
# Default MTU for every packet, safe setting is (and the default) 1300 for internet based traffic
|
|
mtu: 1300
|
|
# Route based MTU overrides, you have known vpn ip paths that can support larger MTUs you can increase/decrease them here
|
|
routes:
|
|
#- mtu: 8800
|
|
# route: 10.0.0.0/16
|
|
# Unsafe routes allows you to route traffic over nebula to non-nebula nodes
|
|
# Unsafe routes should be avoided unless you have hosts/services that cannot run nebula
|
|
# NOTE: The nebula certificate of the "via" node *MUST* have the "route" defined as a subnet in its certificate
|
|
unsafe_routes:
|
|
- route: 172.16.1.0/24
|
|
via: 192.168.100.99
|
|
|
|
|
|
# TODO
|
|
# Configure logging level
|
|
logging:
|
|
# panic, fatal, error, warning, info, or debug. Default is info
|
|
level: info
|
|
# json or text formats currently available. Default is text
|
|
format: text
|
|
|
|
#stats:
|
|
#type: graphite
|
|
#prefix: nebula
|
|
#protocol: tcp
|
|
#host: 127.0.0.1:9999
|
|
#interval: 10s
|
|
|
|
#type: prometheus
|
|
#listen: 127.0.0.1:8080
|
|
#path: /metrics
|
|
#namespace: prometheusns
|
|
#subsystem: nebula
|
|
#interval: 10s
|
|
|
|
# Nebula security group configuration
|
|
firewall:
|
|
conntrack:
|
|
tcp_timeout: 120h
|
|
udp_timeout: 3m
|
|
default_timeout: 10m
|
|
max_connections: 100000
|
|
|
|
# The firewall is default deny. There is no way to write a deny rule.
|
|
# Rules are comprised of a protocol, port, and one or more of host, group, or CIDR
|
|
# Logical evaluation is roughly: port AND proto AND ca_sha AND ca_name AND (host OR group OR groups OR cidr)
|
|
# - port: Takes `0` or `any` as any, a single number `80`, a range `200-901`, or `fragment` to match second and further fragments of fragmented packets (since there is no port available).
|
|
# code: same as port but makes more sense when talking about ICMP, TODO: this is not currently implemented in a way that works, use `any`
|
|
# proto: `any`, `tcp`, `udp`, or `icmp`
|
|
# host: `any` or a literal hostname, ie `test-host`
|
|
# group: `any` or a literal group name, ie `default-group`
|
|
# groups: Same as group but accepts a list of values. Multiple values are AND'd together and a certificate would have to contain all groups to pass
|
|
# cidr: a CIDR, `0.0.0.0/0` is any.
|
|
# ca_name: An issuing CA name
|
|
# ca_sha: An issuing CA shasum
|
|
|
|
outbound:
|
|
# Allow all outbound traffic from this node
|
|
- port: any
|
|
proto: any
|
|
host: any
|
|
|
|
inbound:
|
|
# Allow icmp between any nebula hosts
|
|
- port: any
|
|
proto: icmp
|
|
host: any
|
|
|
|
# Allow tcp/443 from any host with BOTH laptop and home group
|
|
- port: 443
|
|
proto: tcp
|
|
groups:
|
|
- laptop
|
|
- home
|